Flex Coat Color Coded Syringes - Set of 2 reusable 3 cc syringes.  Guarantee accurate measurement of Flex Coat 50/50 mix.

Trondak Color Lock - 1 OZ.  Maintains the bright appeal of the threadwork.  A water-based compound, brushes are simply cleaned in tap water.  Enhances snakesin usage.  Glues it to the rod, and is a good sealant to apply over it before epoxy.  An effective sealant for all threads on other devices.

Mixing Cups - Bulk Pack of 100 - Clear 1 OZ. plastic cups make a handy accessory to Flex Coat Finish and Epoxy Glue.

Mixing Cups & Sticks - 10 cups & 10 sticks - Clear 1 OZ. plastic cups and mixing sticks make a handy accessory to Flex Coat Finish and Epoxy Glue.

Flex Coat Nylon Brushes - 10 Pack of 1/4" brushes.  Very low cost, good quality finishing brushes.  Great for applying Flex Coat Rod Finish and Color Preserver.

Flex Coat Nylon Brushes - 10 Pack of 1/8" brushes.  Very low cost, good quality finishing brushes.  Great for applying Flex Coat Rod Finish and Color Preserver.

Flex Coat China Bristle Brushes - 4 Pack of 1/2" brushes. Economy Florida style brushes for applying Flex Coat Rod Finish and Color Preserver to large rods.

Flex Coat Color Coded Syringes - Set of 2 reusable 12 cc syringes.  Guarantee accurate measurement of Flex Coat 50/50 mix.

Flex Coat Epoxy Brush Cleaner - 4 OZ.  A safe and mild alternatine to low flash point solvents for cleaning liquid Flex Coat from brushes.  This is a great way to extend the life of high quality brushes.

Open Ring Thread Scissors - Finely serrated edge make these sharp scissors great for cutting thread while wrapping rods.  Vinyl coated open ring handle allow to continuously wrap while holding the scissors.

Trondak Cork Seal - 2 OZ.  Seals the surface of cork preventing the penetration of all sorts of grime for a better look and feel.  Protects cork from abrasion, chipping, and the costly premature deterioration they cause.  Easy maintenence as it provides a surface that is easily cleaned of grime and fish residue with just soap and water.

Flex Coat Color Preserver - 4 OZ.  This strong, non-yellowing color preserver provides great penetration and color retention.  The easy to use, non-toxic formula cleans up quickly with water.  Apply 2 or 3 coats on regular thread.  Apply one coat on NCP thread if sealer is desired.

Trondak Perma Gloss Rod Finish - 1 OZ.  Features moisture-curing urethane.  An ultra light-weight yet strong and durable finish.  No mixing, easy clean-up.  Non-yellowing U-40 sunblock.  Easy to apply one part system.

Flex Coat Ultra V High Build Epoxy Formula - 2 OZ kit wrap finish with syringes.  Similiar to the original high build formulation but with added UV protection for use over light colored threads.  It also has an extended pot life for additional working time.  Perfect for heavy-duty salywater rods.

DR. SLICK Thread Bobbin - SMALL - This small bobbin is only 3" long. It will hold a 100 YD spool of thread and fits perfectly in your palm. Flared on the infeed end, it also carries the ceramic insert.

Flex Coat Lite Epoxy Formula - 2 OZ kit wrap finish with syringes.  If you desire a lighter weight, thinner coating, choose Flex Coat Lite.  Beginners love how easy it is to use.  Pros choose "Lite" for its elegant appearance.  Perfect for fly rods and ultra light rods.  Can be applied in multiple coats if you desire more depth without additional weight.

Flex Coat Ultra V High Build Epoxy Formula - 4 OZ kit wrap finish with yorker cap.  Similar to the original high build formulation but with added UV protection for use over light colored threads.  It also has an extended pot life for additional working time.  Perfect for heavy-duty saltwater rods.

DR. SLICK Thread Ceramic Bobbin - LARGE - This bobbin is designed to hold the larger spool 1 OZ of rod wrapping thread.  This model features a ceramic insert and is flared on the infeed end.

Flex Coat Rod Builder's Epoxy Glue - 4 OZ with yorker cap.  This is a professional, clear, high strength, waterproof bonding material.  Perfect for gluing reel seats, ferrules, gembles, handles, grips, roller tip tops, cork rings, butt caps and for general repair.  Pot life of 2- minutes, full strength in 2 hours.

Flex Coat Rod Builder's Epoxy Glue - 8 OZ with yorker cap.  This is a professional, clear, high strength, waterproof bonding material.  Perfect for gluing reel seats, ferrules, gembles, handles, grips, roller tip tops, cork rings, butt caps and for general repair.  Pot life of 2- minutes, full strength in 2 hours.

Flex Coat Ultra V High Build Epoxy Formula - 8 OZ kit wrap finish. Similar to the original high build formulation but with added UV protection for use over light colored threads. It also has an extended pot life for additional working time. Perfect for heavy-duty saltwater rods.

Batson Forecast Dream Reamer -Individual shaft with handle - Small 5.60mm (.220) -- 9.53mm (.375) This cork reamer by Batson is the custom rod builder's ideal answer to reaming cork grips to fit blanks. The threaded tapered fiberglass shafts can be used with the handle or with a portable low RPM drill, using the metal sleeve on the base for chucking. The sandpaper on the shaft cuts through cork like a hot knife through butter, and is durable enough for several pieces of cork.

Batson Forecast Dream Reamer -Individual shaft with handle - Medium 8.65mm (.340) -- 12.08mm (.475). This cork reamer by Batson is the custom rod builder's ideal answer to reaming cork grips to fit blanks. The threaded tapered fiberglass shafts can be used with the handle or with a portable low RPM drill, using the metal sleeve on the base for chucking. The sandpaper on the shaft cuts through cork like a hot knife through butter, and is durable enough for several pieces of cork.

Batson Forecast Dream Reamer -Individual shaft with handle - Large - 12.08mm (.475) -- 14.33mm (.565). This cork reamer by Batson is the custom rod builder's ideal answer to reaming cork grips to fit blanks. The threaded tapered fiberglass shafts can be used with the handle or with a portable low RPM drill, using the metal sleeve on the base for chucking. The sandpaper on the shaft cuts through cork like a hot knife through butter, and is durable enough for several pieces of cork.

Flex Coat Lite Epoxy Formula - 8 OZ kit wrap finish. If you desire a lighter weight, thinner coating, choose Flex Coat Lite. Beginners love how easy it is to use. Pros choose "Lite" for its elegant appearance. Perfect for fly rods and ultra light rods. Can be applied in multiple coats if you desire more depth without additional weight.

Flex Coat Ultra V High Build Epoxy Formula - Quart kit wrap finish. Similar to the original high build formulation but with added UV protection for use over light colored threads. It also has an extended pot life for additional working time. Perfect for heavy-duty saltwater rods.

Flex Coat Lite Epoxy Formula - Quart. If you desire a lighter weight, thinner coating, choose Flex Coat Lite. Beginners love how easy it is to use. Pros choose "Lite" for its elegant appearance. Perfect for fly rods and ultra light rods. Can be applied in multiple coats if you desire more depth without additional weight.